FACEBOOK/PALSTARINCORPORATED

DESIGNED AND MADE IN THE USA | Call Toll-Free: 1-800-773-7931


       HOME | JOBS | DEALERS | ABOUT US | POLICIES | REVIEWS


Procedure for resetting roller inductor counter to zero
  1. Remove the cover from you tuner.
  2. The roller inductor counter is driven from the crank handle shaft by a pair of Nylon bevel gears. The gear on the counter shaft is held by a setscrew; the gear on the crank handle shaft is a friction fit. Slide the crank handle shaft gear away from the counter shaft gear until they no longer mesh.
  3. Crank the roller inductor until the roller is at the front stop.
  4. Turn the counter shaft until the counter reads all zeros.
  5. Slide the crank handle shaft gear back into mesh with the counter shaft gear.
  6. Re-install cover.
Procedure complete!


Products

Automatic Antenna Tuner

HF-AUTO 1500 Watt

Antenna Tuners

AT-500 600 Watt
AT2K 2000 Watt
AT2KD 2000 Watt
AT4K 2500 Watt
AT5K 3500 Watt
AT1500HB RF Matching Network

How-To Reset counter to zero
How-To align Peak/Hold Meter

Balanced Antenna Tuner

BT1500A 1500 Watt

Antenna Analyzer

ZM30 Antenna Analyzer

Dummy Loads

DL1500 1500 Watt
DL2K 2000 Watt
DL5K 5000 Watt

Wattmeters

PM2000A SWR
PM2000AM SWR

Shortwave Radio

R30A Shortwave Receiver
MW550P MW/SW Preselector
LA30 Rotating Loopstick Antenna
   LA30 Long Wave Loop option
   LA30 Tropical Loop option
AA30 Active Antenna
SP30B Speaker
SP30H Ultimate Speaker

CW Keyer

CW50A Electronic Keyer

Baluns

B4KC 4:1 Current Balun
B4KC 1:1 Current Balun

Inductors

RI-20 Roller
RI-26 Roller
RI-28 Roller

Variable Capacitors

C500
C600
C1350

Turns Counter

Precision Turns Counter

Filters

FL30 LPF

Obsolete Manuals

AT1500CV
AT1500DT
AT1KM
AT2K With Balun
AT2KD With Balun



Enter your callsign to see if you have an eQSL waiting!