AT2K Antenna Tuner

9006700
$795.00
AT2K Antenna Tuner
Processing...

Product Details


New for 2018: AT2K gray front panel.

The new AT2K 2000 watt antenna tuner covers 160 to 6 Meters with a power rating of up to 2000 watts PEP and features a newly-designed, smaller roller inductor allowing the AT2K to tune 6 Meters without the need for the additional red button as on older models. The updated design for the capacitors features lower minimum capacitance for improved high band performance, while maximum capacitance has been increased to 400pF for better low band performance.

The AT2K matches dipoles, center fed doublets, Verticals, end-fed wire, delta loops, beams, Windoms, Inverted V's and an optional external 4:1 or 1:1 current balun for balanced wire feeders can be purchased during check-out. Featuring a 6 position antenna selector switch, the AT2K offers forward power metering in two ranges, 300 and 3000 watts.

Also included is Pastar's Active Peak and Peak Hold dual cross-needle metering from the popular PM2000A wattmeter. Standing Wave Ratio measurements are displayed with an illuminated cross-needle meter. SWR is read directly from the meter face where the Forward and Reverse needles cross.

Add 11 Ga. (.090" thick) iridite-treated aluminum metalwork and durable powder coated finish on the front panel and top cover, and you have the AT2K, a premium quality antenna tuner.

Download:   AT2K Manual

Power 2000 Watts PEP
Bands 160m to 6m (assuming resistive load)
Tuning Three controls
Antenna switching: 6 position mode switch for multiple antennas
Cap. Low minimum custom variable capacitor; 15pF - 400pF@4.5 kV
Ind. Silver-plated inductor wheel shaft and contact wheel on polyresin body
Imp. Matching range 15 Ohms to 1500 Ohms
Meter Active crossneedle Peak/Peak Hold with backlighting
Meter power range 0-300 Watts/
0-3000 Watts
Input 12 VDC 200 mA
Power cable supplied
Requires power supply
Balun Optional external 1:1 or 4:1 current
Cover & Chassis .090 ga. aluminium powder coated
Front Panel .090 ga. aluminium powder coated
Size 14.5" wide x 5" high x 13.5" deep
Weight 14 lbs
One year Warranty